The ShadowLine pleated blind combines decoration and sun protection. ShadowLine offers a high quality and reliable honeycomb blind system : Benthin ( Decomatic®). With different control options, a choice of profiles colors with color matched components and with over 90 model types for each system we provide a decorative, functional system perfectly suited for home and office interior and for all window types.
Simple operation of pre-tensioned pleated blinds with a discreet and stylish bracket [A]. Or a silver metal bracket[B] with individually coloured inserts as a premium design option.
Cord operation 
Integrated cord lock, without cordovertravel. With a child-safe tassel [C].
This opens under load so that no loop can develop.
Chain operation 
Smooth, quiet and child safe chain
drive (Ø4.5 x 6 mm) with a chain safety device.
An optimal control is achieved through suitable gearing
Motor operation 
1.Opening and closing the blind with a 24 V Somfy motor operated using a switch or, for greater convenience, by remote control.
2.Innovative drive - wireless, invisible and whisper-quiet battery motor. Fixed cabling with additional external power sources is therefore not necessary.
Crank operation 
Crank operation for ceiling or Sky light winter garden blinds with detachable and overload safe crank handle.
Spring drive 
A child-safety way to operate free-hanging systems. The window is kept free of cords or chains. The system is continuously adjustable.
Cordless and child safe system
F-Touch is a pleated and honeycomb blind type where through the operation of the bottom rail you can move your blind into desired position.
This type complies a childproof according to EN 13120 European standard. The window is kept free of cords or chains.
Thanks to the innovating spring system placed in the upper rail, even large shades are possible. Maximum width is 230 cm and the maximum height is 210 cm.
The profiles are available in white, silver, black and anthracite. Bottom rail can be made with or without handle.
Battery, wireless motor
With this model, both the battery and the motor are located in the head rail. Fixed cabling with additional external power sources is therefore not necessary. The low-noise motor can run around 400 cycles with just one battery charge at a room temperature of 20 ° C. This corresponds to an operating time of approx. 7 months (depending on user behavior *). The battery is fully charged in 4 hours via a charging socket which is integrated in the housing. The hole in the head profile is covered with a cap and makes the charging connection almost invisible. The pleated system is operated using a programmable hand-held transmitter with 16 channels and the option of group control. A convenient option is to define an individual stop position. The learning and use of the remote control are explained in a clear programming guide. Max. width 230 cm and max. height 260 cm. This type complies a childproof according to EN 13120 European standard. The window is kept free of cords or chains.
Mounting options without drilling and screwing
Clamp bracket with sealing pad
It is a perfect solution to avoid drilling and to improve the energy efficiency. Available in white, grey, black and anthracite.
The sealing pads are attached to the back of the fixing brackets and avoid hollow spaces in the rubber sealing of the window which otherwise are formed, when tightening the brackets. The sealing pads make sure the insulation remains intact. This is an important factor in the thermal insulation of the window.
Nowadays energy efficiency and protection of our environment are important issues. Tests were done and the results showed that two fixing brackets without sealings pads reduce the insulation of the window by as much as 50%.
In a room of 20 square meters with 2 windows there would be a complete exchange of air within 24 hours and this with the windows being closed! As a consequence there would be a noticeable draught of air and a drop in room temperature. This effect will be avoided by using the clamp brackets.
Pleated and honeycomb blind type P1614
It is a great and simple solution for clamp installation of type 1615 without damaging the window seal.
ShadowLine clamping profile
An intelligent solution to mount blinds without screwing and drilling.
It is the perfect solution especially for rented flats. The mounting of the blinds is very quick and easy.
You don't need any screws or other tools. Also the dismounting is now a child-play and does not cause any damages on the inner sealing of the window.
Within a few seconds you are able to clean your windows.
ShadowLine adhesive profile is our next intelligent solution for mounting Benthin pleated blinds P1615 without screwing and drilling.
Simple to fix and to remove at any time without leaving traces
No tool is needed to fix the ShadowLine adhesive profile.
You only have to take measure and to clean the adhesive area with the provided cleaning cloth before fixing.
The adhesive profile is available in white and grey.
This elegant adhesive profile can be attached directly on the glass pane. The holders can be fitted accurately to the glazing bead angle.
With the help of a normal hairdryer the ShadowLine adhesive profile can be removed in shortest time without leaving any traces.
The same like ShadowLine clamping profile it is a great solution for rented flats.
Joint adhesive plate
With the help of the patent-pending joint adhesive plate a pleated and honeycomb blind can easily be glued into almost every glazing bead in a window.
In contrast to other adhesive solutions, the joint adhesive plate works with two legs and a flexible joint, whereby the plate can be adapted to the respective glazing bead and achieves a significantly higher adhesive strength.
Fitted precisely and can be removed without a trace at any time.
In today's world, everything should become easier and more convenient. What could be than more obvious than installing sun and sight protection without tools?.
Gluing is the ideal solution for pleated and honeycomb blinds to plastic window frames and turn / tilt windows.
Installation is child's play in just a few steps. After cleaning the surface and measuring the distances, the bracket is glued to the desired location. If the drying time is observed, sun and privacy protection can be attached.
Thanks to the professional glue, the adhesive holds securely and in long-term. The brackets can be removed again, without leaving adhesive residue or damage on the window frame. Available in white, grey and black.